Jellyfish Lamp - Instructions for Use and Maintenance

Important product notes

Bubbles on the jellyfish should be carefully removed to allow for natural movement in the water. We recommend adding a few drops of liquid dish soap to the water if bubbles persist.

During normal operation the lamp may emit a soft sound characteristic of its internal mechanism, which is completely normal and does not affect its performance.

Detailed installation instructions

-Electrical preparation
Connect the included USB cable to a 5V power source for optimal and safe operation.

-Initial cleaning of the aquarium

Pour approximately half of the water contained in the container. Shake carefully several times and empty completely to remove any impurities or manufacturing residue.

-Water preparation
Refill the container with clean water, leaving approximately 1 cm of space between the surface of the water and the top edge of the aquarium. Add 3 to 6 drops of liquid dish soap to the water to facilitate the movement of the jellyfish.

-Positioning the jellyfish
Carefully arrange the jellyfish's tentacles before placing it in the water. Gently place the jellyfish in the container and close the lid tightly. Turn on the switch to activate the lighting and movement.

-First use - Special considerations
During the first hours of use it is normal for numerous bubbles to appear attached to the jellyfish, which may temporarily affect its buoyancy. These bubbles will gradually disappear over time or can be carefully removed manually if necessary.